Polaris RZR XP1000 and 2016-18 RZR 900 Extreme Front Bumper / Brush Guard with Winch Mount for your UTV
Fits these off road vehicles: 2014-2019 RZR XP1000 (XP1K), 2016-18 RZR 1000-S, 2014-2019 RZR XP1000-4 (4-seater), 2015-19 RZR 900 and 2015-19 RZR 900-4 (NOTE: This will fit the Turbo Model,see notes below)
Made from 1/8" thick and 3/16" thick American Steel.
Powder coated texture black for superior protection.
Mounts behind the radiator, unlike factory bumpers.
Fits most winches up to 3500 lbs.
Allows you to mount your winch up high out of the mud and water or behind the radiator (see notes below if mounting behind the radiator).
Top Mounting Accepts both wide Spool UTV Winches (6-5/8” x 3” deep, bolt pattern) and Standard Spool UTV Winches (4-7/8” Wide x 3” Deep, Bolt Pattern).
Laser Cut and CNC Formed to ensure a perfect fit.
Laser Cut EMP Logo.
Made In Cleveland, Ohio.
If you are mounting a winch behind the radiator you will need a winch mount P/N: EMP- 12363 and an additional Fairlead (see install video).
NOTE: due to frame restrictions if you are mounting a behind the radiator you will not be able to use a wide spool winch. If mounting a winch on top you will only need the fairlead bracket that comes with your winch. If you do not have a fairlead bracket for some reason we do make one it is P/N: EMP-10906.
If you have a turbo model you will have to trim a small slit into the front fascia P/N: 5453075-070 for the arms that go back the frame. This will mostly be hidden behind the bumper. The turbo models have wider front Fascia. This is the 2017-18 models only. On the 2016 and 2019 Models the front fascia was three pieces so the side pieces just have to be removed.